Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi W18 ... W21 — Xerox Phaser 7300

Code: W18 ... W21

Description: Fuse Cut Error in [CMYK] Imaging Unit W18: Cyan W19: Magenta W20: Yellow W21: Black
Remedy: 1 Install a new Imaging Unit and verify the fuse blows. Does the error still appear? Go to step [2]. Complete 2 Check the Imaging Unit Contacts (3-pin) for shorts, damage or defects. Are the contacts defective? Replace the Imaging Unit Contacts. Go to step [3]. 3 Check the wiring from the Imaging Unit Sensor Board to the Engine Controller Board. Is the wiring shorted or damaged? Replace the wiring harness and Back Plate w/Drive Gears Replace the Engine Controller Board.

← Xem tất cả mã lỗi Xerox Phaser 7300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie