Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 135 ... 139 — Xerox Phaser 7400

Code: 135 ... 139

Description: No Data to the [C][M][Y][K] LED Head Code 135: No data to the Yellow LED Head. Code 136: No data to the Magenta LED Head. Code 137: No data to the Cyan LED Head. Code 139: No data to the Black LED Head.
Causes: • YK LEDDATA harness, PL12.1.21 • CM LEDDATA harness, PL12.1.22 • Engine Control Board, PL1.1.4
Remedy: 1 Check LED Head. Exchange the affected LED Head with another LED Head. Does the error move with the LED Head? Replace the LED Head. Go to Step 2. 2 Ensure the LED Head harness is properly connected and not damaged. Is the wiring harness defective? Reconnect or replace wiring harness. Go to Step 3. 3 Check harness continuity between the LED Head and the Engine Control Board. Is there continuity? Go to Step 4. Replace the data harness. 4 Check the CUIF connection. Is CUIF firmly connected? Replace the Engine Control Board Connect the two boards and secure the screws. If the error persists, replace the Image Processor Board.

← Xem tất cả mã lỗi Xerox Phaser 7400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie