Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 136 — Xerox Phaser 7400

Code: 136

Description: Finisher Punch Registration Sensor Failure An error was detected in the Horizontal Registration Home Position Sensor.
Causes: • Horizontal Registration Home Position Sensor • Punch Control Board • Finisher Control Board
Remedy: 1 Test the Punch Registration Sensor. Run the Service Diagnostics Punch Registration Sensor test. Does the sensor function correctly? Go to Step 6. Go to Step 2. 2 Check the sensor harness connection. Is P/J1006 connected to the Punch Control Board? Replace the sensor. If the error persists, go to Step 3. Connect the harness. 3 Check the harness continuity. Disconnect P/J1006 and P/J2007. Is the harness conductive? Go to Step 5. Replace the harness. 4 Check for +5 V to the sensor. Disconnect P/J1006. Is there +5 V at J1006-3 <=> ground? Go to Step 5. Replace the Punch Control Board. 5 Replace the Finisher Control Board. Does the error still occur? Replace the Engine Control Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 7400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie