Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 230 ... 234 — Xerox Phaser 7400

Code: 230 ... 234

Description: CRUM Reader Board Failure An error occurred while attempting to read the status of the Toner Cartridge CRUMs. Code 230: The CRUM Reader Board does not respond. Code 231: A communications error with the CRUM Reader Board. Code 232: A transmit error with the CRUM Reader Board at power on. Code 233: A communications error between the CRUM Antenna and CRUM. Code 234: The CRUM Reader Board detects five or more CRUMs.
Causes: • CRUM Antenna • CRUM Reader Board
Remedy: 1 Check all pins of the CRUM Harness for continuity. 1. Remove the Top Cover. 2. Disconnect the CRUM cable from RFID on the Engine Control Board and CN1 on the CRUM Reader Board. Is the cable conductive? Replace the CRUM Reader Board. If the error persists, go to Step 2. Replace the CRUM Harness. If the error persists, go to Step 2. 2 Check continuity of each Antenna Harness. Disconnect CN2, CN3, CN4, and CN5 from the CRUM Reader Board and CRUM Antennas. Is each harness conductive? Replace the CRUM Antennas. If the error persists, go to Step 3. Replace damaged wiring. 3 Check for +5V at RFID-2 on the Engine Control Board. Is there +5 V at RFID-2 <=> ground? Go to Step 4. Replace the Engine Control Board. 4 Check for +5V at POWER-2 on the Engine Control Board. Is there +5 V at POWER-2 <=> ground? Replace the Engine Control Board. Replace the LVPS.

← Xem tất cả mã lỗi Xerox Phaser 7400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie