Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 911 ... 914 — Xerox Phaser 7400

Code: 911 ... 914

Description: Tray [3][4][5][6] Lift Motor Failure Code 911: The Tray 3 Lift Motor is not rotating. Code 912: The Tray 4 Lift Motor is not rotating. Code 913: The Tray 5 Lift Motor is not rotating. Code 914: The Tray 6 Lift Motor is not rotating.
Causes: • Lift Motor, PL4.1.23 • Option Control Board • Engine Control Board, PL1.1.4 • LVPS, PL3.1.1
Remedy: 1 Check the Option Tray connector for damage. Is the connector damaged? Replace the connector. Go to Step 2. 2 Test the appropriate Lift Motor. 1. Close the Interlock Switches for test. 2. Run the Service Diagnostics Lift Motor test. Does the motor operate? Go to Step 3. Replace the motor. If the error persists, go to Step 4. 3 Check all pins on the OPTIF Harness for continuity. Disconnect OPTIF from the Engine Control Board and Option connector. Is the harness conductive? Replace the Option Control Board. If the error persists, replace the Engine Control Board. Replace the OPTIF Harness. 4 Check for +24 V at OPTRY24. 1. Close the Interlock Switches. 2. Disconnect OPTRY24. Is there +24 V at OPTRY24-1 and -2 <=> ground? Replace the affected Option Control Board. Go to Step 5. 5 Check all pins on the OPTRY24 Harness for continuity. Disconnect the OPTRY24 Harness. Is the OPTRY24 Harness conductive? Go to Step 6. Replace the OPTRY24 Harness. 6 Check for +24 V from the LVPS. Disconnect POW24. Is there +24 V at POW24-1 <=> ground? Replace the Motor Driver Board Go to Step 7. 7 Check the LVPS +24 V output. 1. Close the Interlock Switches. 2. Disconnect CN2. Is there +24 V at CN2-1 and <=> ground? Replace the Engine Control Board Replace the LVPS.

← Xem tất cả mã lỗi Xerox Phaser 7400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie