Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 927 ... 927 — Xerox Phaser 7400

Code: 927 ... 927

Description: +24 V Not Available to Tray [3][4][5][6] Voltage detection indicates that +24 V is not available to the indicated option tray. Code 924: Tray 3 not receiving +24 V Code 925: Tray 4 not receiving +24 V Code 926: Tray 5 not receiving +24 V Code 927: Tray 6 not receiving +24 V
Causes: • Motor Driver Board, PL2.1.10 • LVPS, PL3.1.1
Remedy: 1 Check the Option Tray connector for damage. Is the connector damaged? Replace the connector. Go to Step 2. 2 Check for +24 V at OPTRY24. 1. Close the Interlock Switches. 2. Disconnect OPTRY24. Is there +24 V at OPTRY24-1 and -2 <=> ground? Replace the affected Option Control Board. Go to Step 3. 3 Check all pins on the OPTRY24 Harness for continuity. Disconnect the OPTRY24 Harness. Is the OPTRY24 Harness conductive? Go to Step 4. Replace the OPTRY24 Harness. 4 Check for +24 V from the LVPS. Disconnect POW24. Is there +24 V at POW24-1 <=> ground? Replace the Motor Driver Board Go to Step 5. 5 Check the LVPS +24 V output. 1. Close the Interlock Switches. 2. Disconnect CN2. Is there +24 V at CN2-1 and <=> ground? Replace the Engine Control Board Replace the LVPS.

← Xem tất cả mã lỗi Xerox Phaser 7400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie