Code: F132
Description: Finisher Punch Communications Failure An communications error occurred with the Punch Unit.
Causes: • Finisher Control Board • Punch Control Board
Remedy: 1 Check the connection between the Finisher and Punch Controller Boards. Are CN12 and CN14 on the Finisher Control Board connected? Are P/J2003 and P/J2004 on the Punch Control Board connected? Go to Step 2. Connect the harness. 2 Check all the pins of the harness for continuity. Is the cable conductive? Go to Step 3. Replace the harness. 3 Check for +24 V at the Finisher Control Board. Is there +24 V at CN14-5 <=> CN14-3? Replace the Punch Control Board. Replace the Finisher Control Board.