Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi T1, T2 — Xerox Phaser 7400

Code: T1, T2

Description: Fuser Failure The Fuser temperature regulation has failed. Code T1: Fuser Upper Failure Code T2: Fuser Lower Failure
Causes: • Fuser, PL1.1.21 • LVPS, PL3.1.4 • Engine Control Board, PL1.1.4
Remedy: 1 Replace the Fuser. Does the error persist? Go to Step 2 Complete. 2 Check the Fuser Heat Lamps. Does the Fuser error occur after at least 3 minutes of operation? Go to Step 3. Go to Step 4. 3 Did the Fuser warm up? Replace the Engine Control Board. Replace the Fuser. 4 Check the LVPS. Is there AC voltage between CN4-1<=>CN4-4? Replace the Fuser. Replace the LVPS.

← Xem tất cả mã lỗi Xerox Phaser 7400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie