Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U10 — Xerox Phaser 7400

Code: U10

Description: Top Cover Cooling Fan Failure
Causes: • Top Cover Fan, PL12.1.4 • IDFAN Harness, PL5.1.31 • GTG0 Harness, PL5.1.32
Remedy: 1 Test the Top Cover Fan. Run the Service Diagnostics Top Cover Fan test. Does the fan operate correctly. Replace the Engine Control Board. Go to Step 2. 2 Check the Fan connection. Is P/J492 securely connected? Go to Step 3. Connect the Fan. 3 Check continuity of the Top Cover Fan Harness. Is the wiring harness conductive? Replace the Fan. If the error persists, go to Step 4. Replace the harness. 4 Verify +24 volts is available to the Fan. Disconnect IDFAN. Is there +24 volts at IDFAN-??? Go to Step 5. Go to Step 6. 5 Check continuity of the IDFAN Harness. Is the wiring harness conductive? Go to Step 6. Replace the harness. 6 Verify +24 volts is available to the Imaging Unit Sensor Board. Disconnect CTG0. Is there +24 volts at CTG0-9? Replace the Imaging Unit Sensor Board. Go to Step 7. 7 Check continuity of the CTG0 Harness. Is the wiring harness conductive? Replace the Engine Control Board Replace the harness.

← Xem tất cả mã lỗi Xerox Phaser 7400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie