Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U18 ... U21 — Xerox Phaser 7400

Code: U18 ... U21

Description: [C][M][Y][K] LED Failure Code U18: Yellow LED Failure Code U19: Magenta LED Failure Code U20: Cyan LED Failure Code U21: Black LED Failure
Causes: • LED Head, PL1.1.2 • LEDPWR harness, PL12.1.20 • LED Relay Board, PL12.1.34 • YK LEDDATA harness, PL12.1.21 • CM LEDDATA harness, PL12
Remedy: 1 Check LED Head. Exchange the affected LED Head with another LED Head. Does the error move with the LED Head? Replace the LED Head. Go to Step 2. 2 Ensure the LED Head harness is properly connected and not damaged. Is the wiring harness defective? Reconnect or replace wiring harness. Go to Step 3. 3 Check harness continuity between the LED Head and the Engine Control Board. Is there continuity? Go to Step 4. Replace the data harness. 4 Check harness continuity between the LED Head and the LED Relay Board. Is there continuity? Go to Step 5. Replace the power harness. 5 Check for +5 V to the LED Relay Board. Disconnect the POWER connector. Is there +5 V between POWER-1 <=> ground? Replace the LED Relay Board. Go to Step 6. 6 Check for +5 V at the LVPS. Disconnect CN1 from the LVPS. Is there +5 V between CN1-1 and CN1-2? Replace the Engine Control Board. Replace the LVPS.

← Xem tất cả mã lỗi Xerox Phaser 7400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie