Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U34 — Xerox Phaser 7400

Code: U34

Description: Unsupported Duplex Unit ROM The installed Duplex Unit does not contain the correct firmware.
Causes: • Duplex Unit, PL16.1.0 • Engine Control Board PL1.1.4
Remedy: 1 Check the following for evidence of fault or damage: • Duplex Connector Is there any damage? Replace any damaged parts. Go to Step 2. 2 Check that the Duplex Unit is correctly installed and fully seated. Go to Step 3. Reseat the Duplex Unit 3 Check the Duplex Unit version using the Service Diagnostics General Status menu. Is the version current? Replace Engine Control Board, if the error persists, replace the DUPLEX harness. Replace the Duplex Unit.

← Xem tất cả mã lỗi Xerox Phaser 7400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie