Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U51 — Xerox Phaser 7400

Code: U51

Description: Inverter Unit Interface Failure A communication error has occurred in the Finisher Inverter.
Causes: • Inverter Control Board • Engine Control Board, PL1.1.4
Remedy: 1 Check the following for evidence of fault or damage: • Inverter Interface Cable • Inverter connections Is there any damage? Replace any damaged parts. Go to Step 2. 2 Check the Inverter connection. Is the Inverter interface cable securely connected at both ends? Go to Step 3. Connect the Inverter to the Finisher. 3 Check all pins on the OPTIF Harness for continuity. Disconnect OPTIF from the Engine Control Board and Option connector. Is the harness conductive? Replace the Inverter Control Board. If the error persists, replace the Engine Control Board. Replace the OPTIF Harness.

← Xem tất cả mã lỗi Xerox Phaser 7400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie