Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U7 — Xerox Phaser 7400

Code: U7

Description: Feeder Home Failure U7: Tray 1 (MPT) does not reach home position.
Causes: • Home Position Sensor, PL8.1.8 • Registration Motor, PL4.2.36 • MPTHOME Harness, PL8.1.9
Remedy: 1 Check the Tray 1 (MPT) Lift Plate by printing a job from Tray 1 (MPT). Does the Lift Plate operate correctly? Go to Step 3. Go to Step 2. 2 Test the Registration Motor Run the Service Diagnostics Registration Motor B test. Is the motor operating correctly? Replace the Tray 1 (MPT) Assembly. Replace the Registration Motor. 3 Test the Tray 1 (MPT) Home Position Sensor. Run the Service Diagnostics MPT Roller Home test. Does the sensor function correctly? Replace the Engine Control Board. Go to Step 4. 4 Check continuity of the MPTHOME harness. Is the wiring harness conductive? Replace the Engine Control Board. Replace the MPTHOME harness.

← Xem tất cả mã lỗi Xerox Phaser 7400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie