Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 10 — Xerox Phaser 7700

Code: 10

Description: 06-380 06-381 06-382 06-383 06-385 ERROR 10 LASER UNIT FAILURE
Remedy: Remove Rear Cover. Disconnect P400 and P401 on the Engine Control Board. Inspect both connectors to determine they are fully engaged as a unit. Re-engage, if necessary. Note The two connectors can NOT properly seat into their socket(s) unless they are both engaged as a unit. Ensure there is no separation. Carefully reinsert the plugs into their joint socket and FIRMLY seat them. Replace the Laser Unit. Note Whenever the mounting screws for the Laser Unit have been loosened, it is necessary to recalibrate the unit by performing the RegiCon Adjustment Procedure beginning.

← Xem tất cả mã lỗi Xerox Phaser 7700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie