Code: 117
Description: 12-255 FINISHER ERROR 117 STACKER TRAY FAILURE
Remedy: Remove the Finisher Front Cover and Rear Cover]. Defeat the Front Cover Interlock. Enter Service Diagnostics Mode. From the Main Menu, “Motors/Fans Tests/Finisher Motors/Stacker.” Run Motor Up and Down tests. Does the Stacker Tray move up and down? Y↓N→ Inspect the Stacker Motor Assembly and Belt Bracket Assembly for damage. Replace as necessary. Does the Stacker move now? Y↓N→ Replace the Finisher Control Board. Problem solved. Drive the Stacker Tray to its highest position using the Motor Up test. From the Main Menu, select “Sensor Tests/Finisher Sensors/Stacker. While watching the display, interrupt the Stack A and Stack B sensors. Does the display indicate H & L for both sensors? Y↓N→ Does the display indicate H & L for one sensor? Y↓N→ Replace the Finisher Controller Board. Address the following components/assemblies in order: • The unresponsive sensor. • The Finisher Control Board. • The wiring harness between the sensors and the Finisher Control Board. Replace the Engine Control Board in the printer.