Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 20 — Xerox Phaser 7700

Code: 20

Description: 09-342 ERROR 20 TRANSFER ROLLER CONTACT FAILURE
Remedy: Enter Service Diagnostics Mode. Perform the “2nd BTR Motor” test. Listen for a short run of the motor. Did the motor run? Y↓N→ Remove the Left-Hand Rear Mid Cover. Inspect the Left-Hand Cover Assembly wiring harness for damage and ensure all connectors are properly seated. If the problem persists, replace the Engine Control Board. If the problem continues to persist, replace the entire Left-Hand Cover Assembly. Remove the Rear Cover and Rear Shield. Reconnect power and enter Service Diagnostics Mode. Measure the voltage at the Engine Control Interface Board P532A-14. Perform the “2nd BTR Motor” several times. Does the voltage toggle between +5 VDC and 0 VDC when the test is run? Y↓N→ Replace the Transfer Roller Retract Sensor. Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 7700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie