Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 001-302 — Xerox Phaser 7760

Code: 001-302

Description: Front Cover Door Open Front Cover Door is open.
Remedy: Open the Front Cover. Cheat the Front Interlock Switch (PL 10.1). 01-510 is cleared. Y↓N→+24 VDC is measured between the I/F PWB P/J531-1 (+) and GND (-) ( I/F PWB, MAIN Motor, LVPS Plug/Jack Locations ). Y↓N→+24 VDC is measured between the Front Interlock Switch P/J171-B1 (+) and GND (-) ( Xerographic, Plug/Jack Locations ). Y↓N→+24 VDC is measured between the Front Interlock Switch P/J171-A1 (+) and GND (-) (refer to Xerographic - Plug/Jack Locations ). Y↓N→Repair the open circuit between the Left Cover Interlock Switch P/J172-B1 ( Exit Transport Assembly - Plug/Jack Locations ) and the Front Interlock Switch P/J171-A1. Replace the Front Interlock Switch (PL 10.1). +24 VDC is measured between the RH Cover Interlock Switch P/J173-B1 (+) and GND (-) ( Outlet Panel Assembly - Plug/Jack Locations ). Y↓N→+24 VDC is measured between the RH Cover Interlock Switch P/J173-A1 (+) and GND (-). Y↓N→Repair the open circuit between the Front Interlock Switch P/J171-B1 and the RH Cover Interlock Switch P/J173-A1. Replace the RH Cover Interlock Switch (PL 10.1). Check the wire for an open circuit between the RH Cover Interlock Switch P/J173-B1 and P/J531-1 on the I/F PWB (HVPS, +24V LVPS - Plug/Jack Locations) Replace the I/F PWB (PL 9.1). If the problem continues, replace the Engine Control Board (MCU PWB) (PL 13.1). Check installation of the Cover/Actuator (PL 10.1).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie