Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 001-545.01 — Xerox Phaser 7760

Code: 001-545.01

Description: Tray 2 Paper Size Sensor Incorrect paper size is detected in Tray 2.
Remedy: Ensure Tray 2 is closed. The voltage measured at P/J414-A10 (refer to Control Board (MCU PWB) Plug/Jack Locations ) on the Engine Control Board (MCU PWB) corresponds to the paper size in Table 1. Y↓N→There is +3.5 VDC from P/J115 pin 1 to P/J115 pin 3 on the Tray 1 Size Sensor ( Developer Motor, Tray 2 Size Switch Plug/Jack Locations ). Y↓N→There is +3.5 VDC from P/J414-A11 to P/J414-A9. Y↓N→Go to the 3.3 VDC Wirenets to troubleshoot the power circuit. Check the wires from J414A to J115. Check the wire from J414A-10 to J115-2. If the problem continues, replace the Engine Control Board (MCU PWB) (PL 13.1).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie