Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 001-545.02 — Xerox Phaser 7760

Code: 001-545.02

Description: Tray 3 Paper Size Sensor Incorrect paper size is detected in Tray 3.
Remedy: Ensure Tray 3 is closed. The voltage measured at P/J546-8 ( - TT Module (rear); Plug/Jack Locations ; 3T Module (rear) Plug/Jack Locations ) on the Tray Module PWB (PL 16.15) corresponds to the paper size in Table 1. Y↓N→There is +5 VDC from P/J816-1 to P/J816-3 on the Tray 3 Size Sensor ( - 3T Module (Tray 3, 4, 5 Paper Size Switch) Plug/Jack Locations ). Y↓N→There is +5 VDC from P/J546-9 to P/J546-7 on the Tray Module PWB. Y↓N→Go to the +5 VDC Wirenets ( 5.5 VDC Wirenets ) to troubleshoot the power circuit. Check the wires from P/J546 to P/J816. Check the wire from P/J546-8 to P/J816-2. If the wire is OK, replace the Tray 3 Paper Size Sensor (PL 16.1). Replace the Tray Module PWB (PL 16.15). If the problem continues, replace the Tray 3 Paper Size Sensor (PL 16.1).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie