Description: Tray 5 (HCF) Paper Size Sensor Incorrect paper size is detected in Tray 5.
Remedy: Ensure Tray 5 is closed. The voltage measured at P/J548-5 ( TT Module (rear) Plug/Jack Locations or 3T Module (rear) Plug/Jack Locations ) on the Tray Module PWB (PL 16.15) corresponds to the paper size in the table. Y↓N→There is +5 VDC from P/J824-1 to P/J824-3 on the Tray 5 Size Sensor ( TT Module (Tray 3, 4, 5 Paper Size Switch) Plug/Jack Locations ). Y↓N→There is +5 VDC from P/J548-6 to P/J548-4. Y↓N→Go to the +5 VDC Wirenets to troubleshoot the power circuit. Check the wires and connectors. If the check is OK, replace the Tray 5 Paper Size Sensor (PL 16.1). Check the wires from J548 to J824. If the check is OK, replace the Tray 5 Paper Size Sensor (PL 16.1). Check the wire from J824-1 to J548-3. If the check is OK, replace the Tray 5 Paper Size Sensor (PL 16.1). Check the wires and connectors for intermittent shorts or loose connections. If the check is OK, replace the Tray Module PWB (PL 16.15). If the problem continues, replace the Tray 5 Paper Size Sensor (PL 16.1).