Description: Paper Tray Error All the Tray Level Sensors did not energize. Fault(s) 007-397, 007-935 may be declared.
Remedy: Check the Diagnostic Fault History. 007-281, 007-282, 007-283, 007-284, 007-291, or 007- 293 fault has occurred. Y↓N→The machine is equipped with a TTM. Y↓N→+24 VDC is measured at P/J555-7 ( TT Module (rear) Plug/Jack Locations on the Tray Module PWB (PL 16.15). Y↓N→Go to the +24 VDC Wirenets to troubleshoot. +5 VDC is measured at P/J555-1 on the Tray Module PWB (PL 16.15). Y↓N→Go to the +5 VDC Wirenets to troubleshoot. Replace the following in sequence: • Tray Module PWB (PL 16.15) • Engine Control Board (MCU PWB) (PL 13.1) The machine is equipped with a 1TM or a 3TM. +24 VDC is measured at P/J555-7 on the Tray Module PWB (PL 15.9). Y↓N→Go to the +24 VDC Wirenets to troubleshoot. +5 VDC is measured at P/J555-1 on the Tray Module PWB (PL 15.9). Y↓N→Go to the +5 VDC Wirenets to troubleshoot. Replace the following in sequence: • Tray Module PWB (PL 15.9) • Engine Control Board (MCU PWB) (PL 13.1) Go to the appropriate RAP.