Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 003-952 — Xerox Phaser 7760

Code: 003-952

Description: Tray 4 No Paper Sensor Tray 4 No Paper Sensor failure.
Remedy: Remove Tray 4. Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Actuate the Tray 4 No Paper Sensor. The display changes. Y↓N→Check the circuit of the Tray 4 No Paper Sensor (TTM or 3TM). Refer to the Transmissive Sensor Procedure for troubleshooting procedure. • Go to the 007-281 RAP (Tray Lift Failure) and check the circuit of the Tray 4 No Paper Sensor (PL 2.4). • Ensure that the connectors shown in the circuit diagram (TTM or 3TM) are securely connected and that the wires are not damaged. • Replace the Tray 4 No Paper Sensor (PL 2.4). • If the problem persists, replace the Tray Module PWB (PL 16.15 - TTM or PL 15.9 - 3TM).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie