Description: Black Imaging Unit Motor Fail Black Imaging Unit Motor has failed.
Remedy: 1 1. Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. 2. Select Motors/Fan Tests > OK. Select Imaging Unit Motors > OK. Go to step 7. Go to step 2. 2 Is the voltage at J235-4 +5 VDC? Go to step 3. Refer to Xerographics to troubleshoot the missing +5 VDC. 3 Is the voltage at J235-1 +5 VDC? Go to step 4. Refer to Xerographics to troubleshoot the missing +24 VDC. 4 1. Run the Imaging Unit Motors test from Service Diagnostics. 2. Is the voltage at J235-5 0 VDC with the test running? Go to step 5. Refer to Xerographics to troubleshoot. 5 Is the frequency between J235-7 between 1KHz and 1.3 KHz? Replace the Black Imaging Unit Motor. Go to step 6. 6 Is the frequency between J535-7 and ground between 1 KHz and 1.3KHz? Check for an open circuit between J235-8 and J535-2. Refer to Xerographics to troubleshoot missing +3 VDC.