Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 007-122 — Xerox Phaser 7760

Code: 007-122

Description: Tray 5 Opened (TTM) The Tray 5 Feed Out Sensor detected paper when Tray 5 is pulled out and pushed in during a print.
Remedy: Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Block and unblock the Tray 5 Feed Out Sensor (PL 16.5) by sliding Tray 5 in and out of the machine. The display changes. Y↓N→Check the circuit of the Tray 5 Feed Out Sensor. Refer to Reflective Sensor Procedure for troubleshooting procedure. • Ensure that the connectors shown in the circuit diagram are securely connected and that the wires are not damaged. • Check the machine Shutdown History Report. If there is a history of this failure, replace the Tray 5 Feed Out Sensor (PL 16.5). • If the problem continues, replace the Tray Module PWB (PL 16.15).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie