Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 007-270 — Xerox Phaser 7760

Code: 007-270

Description: Tray 2 Paper Size Sensor Broken An abnormal A/D value was detected by the Tray 2 Paper Size Sensor.
Remedy: Ensure Tray 2 is closed. The voltage measured at P/J536-B9 (refer to I/F PWB, MAIN Motor, LVPS T11 - Plug/Jack Locations ) on the I/F PWB corresponds to the paper size in Table 1. Y↓N→There is +3.3 VDC from P/J115 pin 1 to P/J115 pin 3 on the Tray 2 Size Sensor (refer to Developer Motor, Tray 2 Size Switch - Plug/Jack Locations ). Y↓N→There is +3.3 VDC from P/J536-B10 to P/J536-B8 (refer to I/F PWB, MAIN Motor, LVPS T11 - Plug/Jack Locations ). Y↓N→Go to the +3.3 VDC Wirenet ( +3.3 VDC Wirenet ) to troubleshoot the power circuit. Check the wires from J414-11 to J115-1. Check the wire from J414-9 to J115-3. Check the connection between the I/F PWB and the MCU PWB. If the check is OK, replace the I/F PWB (PL 9.1). If the problem continues, replace the MCU PWB (PL 13.1).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie