Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 007-274 — Xerox Phaser 7760

Code: 007-274

Description: Tray 1 (MPT) Paper Size Sensor Broken An abnormal A/D value was detected by the Tray 1 (MPT) Paper Size Sensor.
Remedy: Check the voltage between P/J265-2 (yellow wire toward rear) and ground. Move the Side Guide for Tray 1 (MPT). The voltage changes from 0 VDC to 3 VDC. Y↓N→+3.3 VDC is measured at P/J265-1 on the Tray 1 Paper Size Sensor (refer to Tray 1 - Plug/Jack Locations ). Y↓N→Check the wires and connectors. If the check is OK, replace the I/F PWB (PL 9.1) Replace Tray 1 (MPT) Assembly (PL 2.12). Check the wires and connectors. If the check is OK, replace the I/F PWB (PL 9.1).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie