Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 007-276 — Xerox Phaser 7760

Code: 007-276

Description: Tray 4 Paper Size Sensor Broken (TTM) An abnormal A/D value was detected by the Tray 4 Paper Size Sensor.
Remedy: Ensure Tray 4 is closed. The voltage measured at P/J548-11 (refer to TT Module (rear), Plug/Jack Locations ) on the Tray Module PWB (PL 16.15) corresponds to the paper size in Table 1. Y↓N→There is +5 VDC from P/J820-1 to P/J820-3 on the Tray 3 Size Sensor (refer to TT Module (Tray 3, 4, 5 Paper Size Switch) - Plug/Jack Locations ). Y↓N→There is +5 VDC from P/J548-12 to P/J548-10. Y↓N→Go to the +5 VDC Wirenets ( +5 VDC Wirenet ) to troubleshoot the power circuit Check the wires from J548 to J820. If the check is OK, replace the Tray Module PWB (PL 16.15). Check the wire from J548-11 to J820-2. If the wire is OK, replace the Tray 4 Paper Size Sensor (PL 16.1). Check the wires and connectors for intermittent shorts or loose connections. If the check is OK, replace the Tray Module PWB (PL 16.15). If the problem continues, replace Tray 4 Paper Size Sensor (PL 16.1).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie