Description: Tray 5 Paper Size Sensor Broken (TTM) An abnormal A/D value was detected by the Tray 5 Paper Size Sensor.
Remedy: Ensure Tray 5 is closed. The voltage measured at P/J548-5 (refer to TT Module (rear) - Plug/Jack Locations ) on the Tray Module PWB (PL 16.15) corresponds to the paper size in Table 1. Y↓N→There is +5 VDC from P/J824-1 to P/J824-3 on the Tray 5 Size Sensor (refer to TT Module (Tray 3, 4, 5 Paper Size Switch) - Plug/Jack Locations ). Y↓N→There is +5 VDC from P/J548-6 to P/J548-4. Y↓N→Go to the +5 VDC Wirenets ( +5 VDC Wirenet ) to troubleshoot the power circuit. Check the wires and connectors. If the check is OK, replace the Tray Module PWB (PL 16.15). Check the wires from J548 to J824. If the check is OK, replace Tray 5 Paper Size Sensor (PL 16.1). Check the wire from J824-2 to J548-5. If the wire is OK, replace Tray 5 Paper Size Sensor (PL 16.1). Check the wires and connectors for intermittent shorts or loose connections. If the check is OK, replace the Tray Module PWB (PL 16.15). If the problem continues, replace Tray 5 Paper Size Sensor (PL 16.1).