Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 008-151 — Xerox Phaser 7760

Code: 008-151

Description: Tray 4 Takeaway Sensor On Jam The Takeaway Sensor does not detect paper fed from Tray 4.
Remedy: Open the Left Cover and cheat the Left Cover Interlock Switch (PL 16.13). Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Block and unblock the Takeaway Sensor (PL 16.6). The display changes state. Y↓N→Check the circuit of the Takeaway Sensor. Refer to Transmissive Sensor Procedure for troubleshooting procedure. Perform Service Diagnostics. Both Takeaway Rolls (PL 16.6) rotate. Y↓N→Takeaway Motor 1 (PL 16.15) energizes. Y↓N→Check the circuit of the Takeaway Motor 1. Refer to OF 99-9 RAP for troubleshooting procedure. Check the Takeaway Motor 1 and its associated gears (PL 16.15) for damage, contamination or misalignment. • Ensure that the Chutes (PL 16.6) are properly seated and not damaged. • Ensure that the connectors shown in the circuit diagrams ( ) are securely connected and that the wires are not damaged. • Replace the Takeaway Sensor (PL 16.6). • If the problem persists, replace the Tray Module PWB (PL 16.15).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie