Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 008-164 — Xerox Phaser 7760

Code: 008-164

Description: POB Sensor Jam The POB Sensor did not detect paper after the Registration Clutch Energized.
Remedy: Open the Left Cover Assembly (PL 2.9). Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Block and unblock the POB Sensor (PL 2.9). The display changes state. Y↓N→Check the circuit of the POB Sensor. Refer to Reflective Sensor Procedure for troubleshooting procedure. Perform the Registration Clutch test. The Registration Clutch (PL 2.6) energizes. Y↓N→Check the circuit of the Registration Clutch. Refer to OF 99-4 RAP for troubleshooting procedure. Open the Left Cover Assembly (PL 2.8). Actuate the Fuser Exit Switch (PL 2.8). The display changes state. Y↓N→Check the circuit of the Fuser Exit Switch. Refer to OF 99-3 RAP for troubleshooting procedure. Close the Left Cover Assembly. Perform the 2nd BTR Motor test. The 2BTR contacts and retracts. Y↓N→Go to RAP 009-342, 009-343, 2nd BTR Contact a Retract Failure troubleshooting procedure. Perform the Main Motor test. The Main Motor energizes. Y↓N→Check the circuit of the Main Motor. • Ensure that the connectors shown in the circuit diagrams ( ) are securely connected and that the wires are not damaged. • Replace the POB Sensor (PL 2.9).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie