Description: Tray 1 (MPT) Registration Sensor On Jam The Registration Sensor does not detect paper fed from Tray 1/MPT.
Remedy: Open the Left Cover Assembly (PL 2.9). Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Block and unblock the Registration Sensor (PL 2.6). The display changes state. Y↓N→Check the circuit of the Registration Sensor. Refer to Reflective Sensor Procedure for troubleshooting procedure. Close the Left Cover Assembly. Perform Tray 1 Feed Solenoid test. The Tray 1 Feed Solenoid (PL 2.13) energizes. Y↓N→Check the circuit of the Tray 1 Feed Solenoid. Refer to OF 99-4 RAP for troubleshooting procedure. • Ensure that the connectors shown in the circuit diagrams ( ) are securely connected and that the wires are not damaged. • Replace the Registration Sensor (PL 2.6).