Description: Tray 2~5 Registration Sensor On Jam The Registration Sensor does not detect paper fed from Trays 2~5.
Remedy: Open the Left Cover Assembly (PL 2.9) Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Block and unblock the Registration Sensor. The display changes state. Y↓N→Check the circuit of the Registration Sensor. Refer to Reflective Sensor Procedure for troubleshooting procedure. Perform Service Diagnostics. The Takeaway Motor (PL 1.1) rotates. Y↓N→Takeaway Motor (PL 1.1) energizes. Y↓N→Check the circuit of the Takeaway Motor. Refer to OF 99-9 RAP for troubleshooting procedure. Check the Takeaway Motor and its associated gears (PL 1.1) for damage, contamination or misalignment. Check the following: • Ensure that the Chute (PL 2.3) is properly seated and not damaged. • Check the Pinch Rolls (PL 2.3) for damage or contamination. • Ensure that the connectors shown in the circuit diagrams ( ) are securely connected and that the wires are not damaged. • Replace the Registration Sensor (PL 2.6).