Description: Registration Sensor On Jam (Wait Sensor) The Registration Sensor does not detect paper after the Duplex Wait Sensor actuated.
Remedy: Open the Left Cover Assembly (PL 2.9). Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Block and unblock the Registration Sensor (PL 2.6). The display changes state. Y↓N→Check the circuit of the Registration Sensor. Refer to Reflective Sensor Procedure for troubleshooting procedure. Close the Left Cover Assembly and open the Duplex Module Cover. Block and unblock the Duplex Wait Sensor. The display changes state. Y↓N→Check the circuit of the Duplex Wait Sensor. Refer to Transmissive Sensor Procedure for troubleshooting procedure. Close the Duplex Module Cover and remove the Left Upper Cover (PL 2.7). Perform Service Diagnostics. The Duplex Transport Roll (PL 12.1) rotates. Y↓N→The Duplex Motor (PL 12.1) energizes.