Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 009-348, 009-349 — Xerox Phaser 7760

Code: 009-348, 009-349

Description: 1st BTR Contact Fail The 1st BTR did not meet the Contact position or the 1st BTR did not reach the Retract position. This procedure can be used for troubleshooting Chain Link code 009-348 or 009-349.
Remedy: 1 Is the Retract Sensor or Actuator damaged or out of position? Repair or reseat the Sensor. Go to step 2. 2 1. Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Run the 1st BTR Motor Contact/Retract test in Diagnostics. 2. Do the 1st BTRs contact and retract? Replace the Accumulator Belt Assembly. Go to step 3. 3 1. Run the 1st BTR Retract Sensor test. 2. Does the status change between H and L? Go to the Transmissive Sensor Procedure. Replace the Accumulator Belt Assembly.

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie