Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 009-925 — Xerox Phaser 7760

Code: 009-925

Description: Waste Toner Cartridge Installation The Waste Toner Cartridge was not installed correctly.
Remedy: There is +5 VDC from J408-5 on the Engine Control Board (MCU PWB) to GND. Y↓N→There is +5 VDC from FS135 on the Waste Toner Cartridge Interlock Switch to GND. Y↓N→Check the wire from J511B on the +5 VDC LVPS to FS135 on the Waste Toner Cartridge Interlock Switch. There is +5 VDC from FS135 on the Waste Toner Cartridge Interlock Switch to GND. Y↓N→Replace the Waste Toner Cartridge Interlock Switch (PL 4.1). Check the wire between J511B on the +5 VDC LVPS and FS134 on the Waste Toner Cartridge Interlock Switch and the MCU PWB J408-5 for an open circuit or poor contact. Check the connector J408-5 between the MCU PWB and GND. If no problems are found, replace the Engine Control Board (MCU PWB) (PL 13.1).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie