Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 010-111 — Xerox Phaser 7760

Code: 010-111

Description: Printer Exit Sensor Off Jam The Fuser Exit Switch did not deactuate.
Remedy: Remove the Fuser Assembly from the machine and check the Fuser Stripper Fingers and Fuser Roll (PL 7.1) for dirt build up, wear or damage. The check is OK. Y↓N→Clean or replace the Fuser Assembly (PL 7.1). Open the Left Cover Assembly (PL 2.8). Actuate the Fuser Exit Switch (PL 2.8). The display changes state. Y↓N→Check the circuit of the Fuser Exit Switch. Refer to OF 99-3 RAP for troubleshooting procedure. • Ensure that the connectors shown in the circuit diagrams are securely connected and that the wires are not damaged. • If the problem persists, replace the Engine Control Board (MCU PWB) (PL 13.1).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie