Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 010-349 — Xerox Phaser 7760

Code: 010-349

Description: Fuser Front Thermistor Open The Front Thermistor open error. This is a cold condition.
Remedy: 1 1. Turn the printer power Off and remove the Fuser Assembly. 2. Measure the resistance between the Fuser connector P600-4 -and P600-6. 3. Does the resistance measure between 30 K and 190 K Ohms? Go to step 2. Replace the Fuser (PL 7.1). 2 1. Reinstall the Fuser Assembly. 2. Enter Service Diagnostics Menu (refer to Control Panel Diagnostics). Run the Fuser Temperature test. 3. Is the temperature indicated approximately 165°C? Go to step 4. Go to step 3. 3 1. Turn the printer power Off. 2. Check for an open circuit or poor connection between J600-4 J600-6 to J412-8 to J600-6, and J412-9 to J600- 4. 3. Is the wiring OK? Replace the Engine Control Board (MCU PWB). Repair or replace the wiring harness.

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie