Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 010-420 — Xerox Phaser 7760

Code: 010-420

Description: Fuser Near End Of Life Replace the Fuser Assembly in 100K copies.
Remedy: The Fuser Assembly was replaced. Y↓N→Replace the Fuser Assembly. Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Perform the Fuser Present test. Fuser is present. Y↓N→Replace the Engine Control Board (MCU PWB) (PL 13.1). Ensure that the Life setting value is 100K, turn the printer power Off, then On. If the problem continues, replace the Engine Control Board (MCU PWB) (PL 13.1).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie