Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-223 — Xerox Phaser 7760

Code: 012-223

Description: Front Tamper Home Sensor Off Fail Front Tamper Home Sensor is not turned Off within a specified time.Front Tamper Home Sensor is not turned Off after the stop following Front Tamper Home Sensor Off.
Remedy: Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Activate the Front Tamper Motor alternately. The Front Tamper Motor (PL 21.8) runs. Y↓N→Check circuit of the Front Tamper Motor. Refer to OF 99-9 RAP for troubleshooting procedure. Actuate the Front Tamper Home Sensor (PL 21.8) with a piece of paper. The display changes. Y↓N→Check circuit of the Front Tamper Home Sensor. Refer to Transmissive Sensor Procedure for troubleshooting procedure. If the problem continues, replace the Finisher PWB (PL 21.12).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie