Code: 012-229
Description: Booklet Tamper R Home Sensor On Fail Tamper Home Sensor Rear is not turned On within 1000msec from motor On while Booklet Tamper Rear is returning to Home.
Remedy: • Check the Booklet Tamper Home Sensor Rear for improper installation. • Check the Booklet Tamper Home Sensor Rear connectors for connection failure. • Check the Booklet Tamper Motor Rear connectors for connection failure. • Check the Booklet Tamper Motor Rear for improper installation. • Check the gear part for wear or damage. • Check the Booklet Tamper Rear for deformation.
Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Perform the Booklet Tamper Motor Rear test alternately. The Rear Booklet Tamper Motor (PL 21.19) energizes. Y↓N→Check continuity between the Booklet Tamper Motor Rear and the Booklet PWB and the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Booklet Tamper Motor Rear (PL 21.19). If the problem continues, replace the Booklet PWB (PL 21.12). If the problem persists, replace Finisher PWB (PL 21.12). Block/unblock the Booklet Tamper Home Sensor Front. The display changes. Y↓N→Check continuity between the Booklet Tamper Home Sensor Rear and the Booklet PWB and the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Booklet Tamper Home Sensor Rear (PL 21.19). If the problem continues, replace the Booklet PWB (PL 21.12). If the problem persists, replace Finisher PWB (PL 21.12). If the problem continues, replace the Finisher PWB (PL 21.12).
Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Perform the Booklet Tamper Motor Rear test alternately. The Rear Booklet Tamper Motor (PL 21.19) energizes. Y↓N→Check continuity between the Booklet Tamper Motor Rear and the Booklet PWB and the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Booklet Tamper Motor Rear (PL 21.19). If the problem continues, replace the Booklet PWB (PL 21.12). If the problem persists, replace Finisher PWB (PL 21.12). Block/unblock the Booklet Tamper Home Sensor Front. The display changes. Y↓N→Check continuity between the Booklet Tamper Home Sensor Rear and the Booklet PWB and the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Booklet Tamper Home Sensor Rear (PL 21.19). If the problem continues, replace the Booklet PWB (PL 21.12). If the problem persists, replace Finisher PWB (PL 21.12). If the problem continues, replace the Finisher PWB (PL 21.12).