Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-231 — Xerox Phaser 7760

Code: 012-231

Description: Puncher Home Sensor On Fail The Puncher Home Sensor did not turn On within the specified time after the Puncher Motor started running.
Remedy: Check the following components: • Puncher Home Actuator for deformation • Puncher Home Sensor for proper installation • Puncher Home Sensor connectors • Puncher Motor for proper operation • Puncher Motor connectors
Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Perform the Puncher Motor test. The Puncher Motor (PL 21.5) runs. Y↓N→Check circuit of the Punch Motor. Refer to OF 99-9 RAP for troubleshooting procedure. Actuate the Puncher Home Sensor (PL 21.5) with a piece of paper. The display changes. Y↓N→Check circuit of the Puncher Home Sensor. Refer to Transmissive Sensor Procedure for troubleshooting procedure. If the problem continues, replace the Finisher PWB (PL 21.12).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie