Description: Puncher Home Sensor Off Fail The Puncher Home Sensor did not turn Off within 100 msec. after the Puncher Motor had started running.
Remedy: Check the following components: • Puncher Home Actuator for deformation • Puncher Home Sensor for proper installation • Puncher Home Sensor connectors • Puncher Motor for proper operation • Puncher Motor connectors Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Perform the Puncher Motor test. The Puncher Motor (PL 21.5) runs. Y↓N→Check circuit of the Punch Motor. Refer to OF 99-9 RAP for troubleshooting procedure. Actuate the Puncher Home Sensor (PL 21.5) with a piece of paper. The display changes. Y↓N→Check circuit of the Puncher Home Sensor. Refer to Transmissive Sensor Procedure for troubleshooting procedure. If the problem continues, replace the Finisher PWB (PL 21.12).