Description: Booklet Stapler Fail Error signal On and Ready signal Off output from the Booklet Stapler were detected after Booklet Stapling operation. The Stapler Ready signal did not turn to ‘Not Ready’ within the specified time after Booklet Stapler Start signal On. Error signal On and Ready signal Off output from the Booklet Stapler were detected after Stapler Power On check was performed at Power On or when the interlock was closed. Error signal On was detected just before the Booklet Stapling operation.
Remedy: Check continuity between the Staple and Booklet PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Check continuity between the Booklet PWB and Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Staple (PL 21.16). The problem is resolved. Y↓N→Replace the Booklet PWB (PL 21.12). If the problem continues, replace the Finisher PWB (PL 21.12). If the problem continues, replace the Finisher PWB (PL 21.12).