Description: Booklet Drawer Broken Fail Booklet Drawer Set Sensor Open was detected when the Finisher Front Door Interlock was closed.
Remedy: • Check the Booklet Drawer Set Sensor for improper installation. • Check the Booklet Drawer Set Sensor connectors for connection failure. • Check the Booklet Drawer Actuator part for a foreign substance and deformation. • Check the Drawer mechanism for a foreign substance and deformation. Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Perform the Booklet Drawer Set Sensor test. Remove and insert the Booklet Drawer (PL 21.15) manually. The display changes. Y↓N→Check the circuit of the Booklet Drawer Set Sensor. Refer to Transmissive Sensor Procedure RAP for troubleshooting procedure. If the problem continues, replace the Finisher PWB (PL 21.12).