Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-265 — Xerox Phaser 7760

Code: 012-265

Description: Booklet Knife Home Sensor Off Fail When the Booklet Knife moves from Home position, the Knife Home Sensor did not turn Off within the specified time after Knife Solenoid On.
Remedy: • Check the Knife Home Sensor for improper installation. • Check the Knife Home Sensor connectors for connection failure. • Check the Booklet Fold Motor connectors for connection failure. • Check the Knife Solenoid connectors for connection failure. • Check the Knife Solenoid for improper installation. • Check the Knife drive mechanism for a foreign substance.
Manually move the Booklet Tamper to both ends. Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Perform the Booklet Folder Roll Motor test alternately. The Booklet Folder Roll Motor (PL 21.22) energizes. Y↓N→Check continuity between the Booklet Folder Roll Motor and the Booklet PWB and between the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Booklet Folder Roll Motor (PL 21.22). If the problem continues, replace the Booklet PWB (PL 21.12). If the problem persists, replace the Finisher PWB (PL 21.12). Enter Service Diagnostics Menu. Check the Knife Solenoid (PL 21.22). The Knife Solenoid actuates. Y↓N→Check continuity between the Knife Solenoid and the Booklet PWB and between the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Knife Solenoid (PL 21.22). If the problem continues, replace the Booklet PWB (PL 21.12). If the problem persists, replace the Finisher PWB (PL 21.12). Enter Service Diagnostics Menu. Block/unblock the Knife Folding Sensor (PL 21.18). The display changed. Y↓N→Check continuity between the Knife Folding Sensor and the Booklet PWB and between the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Knife Folding Sensor (PL 21.18). If the problem continues, replace the Booklet PWB (PL 21.12). If the problem persists, replace the Finisher PWB (PL 21.12). If the problem continues, replace the Finisher PWB (PL 21.12).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie