Description: Booklet Compiler No Paper Sensor Fail The Booklet Compile No Paper Sensor did not turn On within the specified time.
Remedy: Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Perform the Booklet Compile No Paper Sensor test (PL 21.18). Block/unblock the Booklet Compile No Paper Sensor. The display changed. Y↓N→Check continuity between the Booklet Compile No Paper and the Booklet PWB and between the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Booklet Compile No Paper Sensor (PL 21.18). If the problem continues, replace the Booklet PWB (PL 21.12). If the problem persists, replace the Finisher PWB (PL 21.12). Perform the Booklet Paper Path Motor test (PL 21.22). The Motor energizes. Y↓N→Check continuity between the Booklet Paper Path Motor and the Booklet PWB and between the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Booklet Paper Path Motor (PL 21.22). If the problem continues, replace the Booklet PWB (PL 21.12). If the problem persists, replace the Finisher PWB (PL 21.12). If the problem persists, replace the Finisher PWB (PL 21.12).