Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-300 — Xerox Phaser 7760

Code: 012-300

Description: Eject Cover Open Eject Cover Switch open was detected.
Remedy: • Ensure that the Eject Cover is down. • Check the Eject Cover Switch for improper installation. • Check the Eject Cover Switch connectors for connection failure. • Check the Actuator part for deformation.
Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Actuate the Eject Cover Switch (PL 21.7). The display changes. Y↓N→Check continuity of the Eject Cover Switch. The continuity check is OK. Y↓N→Replace the Eject Cover Switch (PL 21.7). Check continuity between the Eject Cover Switch and the Finisher PWB. If the check is OK, replace the Finisher PWB (PL 21.12). If the problem continues, replace the Finisher PWB (PL 21.12).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie