Description: Booklet Drawer Set Fail Booklet Drawer Set Sensor OPEN was detected.
Remedy: • Check the Booklet Drawer Set Sensor for improper installation. • Check the Booklet Drawer Set Sensor connectors for connection failure. • Check the Actuator part for deformation. Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Perform the Booklet Drawer Set Sensor test. Remove and insert the Booklet Drawer (PL 21.15) manually. The display changes. Y↓N→Check continuity between the Booklet Drawer Set Sensor and Finisher Main PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Booklet Drawer Set Sensor (PL 21.15). If the problem continues, replace the Finisher PWB (PL 21.12). If the problem continues, replace the Finisher PWB (PL 21.12).