Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-902 — Xerox Phaser 7760

Code: 012-902

Description: Paper at H-Transport Exit Sensor Control logic reports paper at the H-Transport Exit Sensor.
Remedy: • Check paper on the H-Transport Exit Sensor. • Check for obstructions in the paper path. • Check the H-Transport Drive Motor Belt for wear or damage. • Check the Guides on the H-Transport Cover for damage, wear or faulty installation.
Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Open the H-Transport Cover and actuate the H-Transport Tray Exit Sensor (PL 21.25). The display changes. Y↓N→Check the circuit of the H-Transport Tray Exit Sensor. Refer to Transmissive Sensor Procedure for troubleshooting procedure. Check the following: • Ensure that the connectors shown in the circuit diagrams are securely connected and that the wires are not damaged • H-Transport and Finisher for a docking failure • H-Transport Motor and its associated gears and belts for damage, contamination or misalignment If the above checks are OK, then replace the H-Transport Entrance Sensor (PL 21.25). If the problem persists, replace the Finisher PWB (PL 21.12).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie