Code: 012-906
Description: Paper at H-Transport Tray Exit Sensor Control logic reports paper at the H-Transport Tray Exit Sensor.
Remedy: • Check paper on the H-Transport Exit Sensor. • Check for obstructions in the paper path. • Check the H-Transport Drive Motor Belt for wear or damage. • Check the Guides on the H-Transport Cover for damage, wear or faulty installation.
Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Open the H-Transport Cover and actuate the H-Transport Entrance Sensor (PL 21.25). The display changes. Y↓N→Check the circuit of the H-Transport Entrance Sensor. Refer to Transmissive Sensor Procedure for troubleshooting procedure. Check the following: • Ensure that the connectors shown in the circuit diagrams are securely connected and that the wires are not damaged • H-Transport and Finisher for a docking failure • H-Transport Motor and its associated gears and belts for damage, contamination or misalignment If the above checks are OK, then replace the H-Transport Entrance Sensor (PL 21.25). If the problem persists, replace the Finisher PWB (PL 21.12).
Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Open the H-Transport Cover and actuate the H-Transport Entrance Sensor (PL 21.25). The display changes. Y↓N→Check the circuit of the H-Transport Entrance Sensor. Refer to Transmissive Sensor Procedure for troubleshooting procedure. Check the following: • Ensure that the connectors shown in the circuit diagrams are securely connected and that the wires are not damaged • H-Transport and Finisher for a docking failure • H-Transport Motor and its associated gears and belts for damage, contamination or misalignment If the above checks are OK, then replace the H-Transport Entrance Sensor (PL 21.25). If the problem persists, replace the Finisher PWB (PL 21.12).